Single Door Magnetic Lock 600Lb / Anti-Residual Magnetism Design / Lock Status Sensor / Ultra-Bright LED
- Brand / Vendor: ACCESSPRO
- Hardware Model / MPN: MAG600NLEDV2
- Deal Status: ⚡ Special Deal (17% OFF)
- Condition: 100% Brand New, Factory-Sealed Commercial Gear
- Category: Access Control
- Fulfillment Origin: Dispatches from Texas & Florida distribution hubs
- Binational Availability: Commercial procurement ready for USA and Mexico
Standard mag locks can keep a faint pull after power is cut, leaving the door feeling stuck. This design releases clean the moment it's de-energized.
| Holding force | 600 lb |
| Release behavior | No residual pull |
| Door types | Security, iron, aluminum |
An ultra-bright LED shows lock state at a glance, and the integrated plate sensor reports door position back to your access control panel.
| Status output | NO / NC / COM dry contact |
| Contact rating | 0.5A @ 30V DC max |
| Indicator | Ultra-bright LED |
- Holding force: 600 lb
- Single door magnetic lock
- Anti-residual magnetism design
- Ultra-bright LED status indicator
- Integrated plate status sensor
- Door status output: NO / NC / COM
- Jumper-selectable 12V or 24V DC
- For security, iron and aluminum doors
- Input voltage: 12V DC or 24V DC
- Current draw: 500mA @ 12V · 250mA @ 24V
- Minimum supply: 0.5A @ 12V · 0.25A @ 24V
- Contact limit: 0.5A / 30V DC
- Dimensions: 9.84' x 1.92' x 1.10'
- Weight: 4.63 lb
- Operating temperature: 14°F ~ 131°F
- Lock body mounts to the door frame
- Armature plate mounts to the door leaf
- Supports 'I', 'L', 'ZL' and 'U' mounting
- Rubber washer allows plate self-alignment
- Voltage selector jumper on-board
- Keep door closed while drilling holes
- Handle armature plate carefully — surface damage reduces holding force
Four mounting configurations, one lock
The same MAG600NLEDV2 body adapts to inswing, outswing, narrow-frame and frameless glass doors — you only change the bracket.
Compatible mounting accessories
Pick the bracket that matches the door and you're done — both are made for this lock body.
Product views
Full specifications
| Performance | |
| Holding force | 600 lb |
| Configuration | Single door |
| Magnetism design | Anti-residual (no lingering pull on release) |
| Compatible doors | Security, iron, aluminum · glass with U bracket |
| Electrical | |
| Input voltage | 12V DC or 24V DC (jumper-selectable) |
| Current draw | 500mA @ 12V DC · 250mA @ 24V DC |
| Minimum supply | 0.5A @ 12V DC · 0.25A @ 24V DC |
| Status output | NO / NC / COM dry contact |
| Contact rating (max) | 0.5A / 30V DC — do not overload |
- Monte el cuerpo de la cerradura en el marco de la puerta y la placa de armadura en la hoja de la puerta.
- Mantenga la puerta cerrada durante la perforación para que la placa y la cerradura queden alineadas.
- Deje la arandela de goma ligeramente suelta: la placa debe moverse un poco al bloquearse para que pueda autoalinearse contra el imán.
- Manipule la placa de armadura con cuidado: cualquier daño en la superficie reduce la fuerza de sujeción.
- Confirme que el puente selector de voltaje coincida con su suministro antes de encender.
- No exceda 0.5A / 30V CC en el contacto de estado.
*Todas las imágenes y especificaciones son solo de referencia y están sujetas a cambios sin previo aviso.
• Free Ground Shipping: Automatically applied to all orders of $500.00 USD and above across the 48 Contiguous United States.
• Same-Day Dispatch: Orders placed before 2:00 PM CST (Mon–Fri) dispatch the same business day from our Texas & Florida distribution hubs.
• Carrier & Transit: UPS Ground / FedEx Ground (typically 2–5 business days).
• 100% Genuine Gear: Brand new, factory-sealed hardware directly sourced via authorized manufacturer channels.
• Full Factory Warranty: Covered by standard manufacturer warranty and RMA replacement support.
• 30-Day Hassle-Free Returns: Unopened and factory-sealed equipment eligible for return within 30 days of delivery.
